Muted outputs in Delta 1010LT

[Clicks&Cuts]

I don't know why I don't heard sound from outputs, only out1/2 is enabled.
What i must change in drivers to enabled others outputs?

second question:
Is it impossible to change peak meter in mixer inputs from pre to post?

third question:
why i don't see increasing performance after changing Soundblaster live to Delta 1010LT?.. even on asio.

[JA]

What software are you using for playback? Do you see activity in the Delta Control Panel? Are the levels turned up?

The meters cannot be changed to post.

What sort of increased performance are you expecting to see? The sound quality should be much better. What buffer size are you running?

[Clicks&Cuts]

Today I try change sound device to M-Audio Delta 1010LT 3/4 in windows .. and i hear sound on speakers now
I have speakers on 3/4 and headphones on 1/2 out
but when I change sound device to M-Audio Delta 1010LT 3/4, and change value in volume slider (delta mixer) for 3/4, nothing happen.

[JA]

The volume sliders on the Monitor Mixer tab only control levels for the Monitor Mixer, not the output itself. If you adjust the SW RTN 3/4 levels on the mixer, you can assign outputs 1/2 to be the Monitor Mixer and also hear the same signal through your headphones.

If you update to the latest driver for XP SP3 (5069v3) there is a new output tab with level controls for each output. This FAQ (http://www.m-audio.com/index.php?do=support.faq&ID=8afcce81d0497cd75e842fe26a5b6f81) has information on the new Delta Control Panel.