Delta 1010Lt Sampling Rate. [Archive] - The Official M-Audio User Forums

View Full Version : Delta 1010Lt Sampling Rate.

auroralview

01-13-2009, 11:02 AM

Hello,

i want to use M-Audio Delta 1010LT card, But i am not sure about the sampling rate of it.

Can i use the sample rates lower than 44100Hz (8000,11025,22050 ..etc) with this card? With driver version 5.0.10.5069, i can not lower the sampling frequency?

Does any one know something about this?

Thanks.

Umut

Paul

01-13-2009, 02:50 PM

If you un-install the current driver and then download the 5057 driver (http://www.m-audio.com/index.php?do=support.drivers&f=785), you should be able to select lower sample rates. This driver is not supported for Vista.

auroralview

01-13-2009, 08:41 PM

Thank you for your response. This driver is for XP SP2. MY computer has an operating system XP SP3. Does this cause problems????

Thanks
Sincerely
Umut

Paul

01-15-2009, 04:13 PM

It may not install, but give it a try. The only problem that I know of is with the installer, so if it installs, you should be fine. Otherwise, you can try to remove SP3 and then install the driver. After the driver is installed, you can install SP3 again.