Delta 66 w/ Omni input signal problem

[GarryJ]

My Delta 66 and Omni have been working perfectly for ages. After installing XP SP3 however, no input signal is being detected by the soundcard.

Input signals are present in the Omni (the LEDs flash), but in the Delta control panel and all audio programs, no input signal shows up. I've tried upgrading the drivers from the 5.10.00.5057 version to 5.10.00.5069, the problem is still the same.

Any ideas?

[Paul]

Try shutting down the computer and then disconnect and reconnect the cable that links the omni and the delta.

[GarryJ]

Tried this a couple of times, with no improvement. I'm fairly sure the problem isn't in the analogue domain, as things were working perfectly before the software updates.

[JA]

Make sure the buttons on the back (for To Ins 1,2 and 3,4) are in the OUT position. When pushed in the aux inputs on the back override the front inputs to the computer. The Delta 66/omni works fine for us on XP SP3 with the 5069 (and 5057v3) driver.