ratboy
01-28-2009, 12:28 PM
HE I AM NEW TO THIS FORUM.
i installed the 24/96 into a new DAW that i recently got.
Unfortunately the DAW had an integrated sound card, but i disabled it in device manager/sound controllers and in the BIOS, so that should not be an issue.
i could not use the DELTA cd BECAUSE IT IS FOR xXP AND THIS MACHINE HAS a vista 64 BIT OS
I DOWNLOADEd THE BETA VISTA 64 BIT DRIVER from here and installed it.
everything seems to be configured and the driver is working properly.
i don't have any fancy S/PIDF or MIDI cable issues, no audio interfaces or guitar to plug in; i am totally software
based
all i need to do is connect my 1/8 speaker cable to the analog jack.
BUT the 1/8 won't fit into the analog jacKS on the 2496 BeACUSE THEY ALL ARE female RCA.
i WAS NOT EXPECTING THAT.
i think my audio is fine. when i enable the other sound card, the audio works. .
so,assuming my configurations and driver are in seemingly good working order for the 2496
it is just the plug.
so then, a trip to radio shack,
and is it just a matter of getting a 1/8 adapter to a (i am presuming) RCA MALE?)
MY I/8 SPEAKER CABLE GOES INTO THE 1/8 ADAPTeR AND THEn THE RCA MALE PLUG ON THE ADAPTeR GOES INTO THE female RC ANALOG JACK on the 2496.
is that the gist of it or am i missing something? thanks
i installed the 24/96 into a new DAW that i recently got.
Unfortunately the DAW had an integrated sound card, but i disabled it in device manager/sound controllers and in the BIOS, so that should not be an issue.
i could not use the DELTA cd BECAUSE IT IS FOR xXP AND THIS MACHINE HAS a vista 64 BIT OS
I DOWNLOADEd THE BETA VISTA 64 BIT DRIVER from here and installed it.
everything seems to be configured and the driver is working properly.
i don't have any fancy S/PIDF or MIDI cable issues, no audio interfaces or guitar to plug in; i am totally software
based
all i need to do is connect my 1/8 speaker cable to the analog jack.
BUT the 1/8 won't fit into the analog jacKS on the 2496 BeACUSE THEY ALL ARE female RCA.
i WAS NOT EXPECTING THAT.
i think my audio is fine. when i enable the other sound card, the audio works. .
so,assuming my configurations and driver are in seemingly good working order for the 2496
it is just the plug.
so then, a trip to radio shack,
and is it just a matter of getting a 1/8 adapter to a (i am presuming) RCA MALE?)
MY I/8 SPEAKER CABLE GOES INTO THE 1/8 ADAPTeR AND THEn THE RCA MALE PLUG ON THE ADAPTeR GOES INTO THE female RC ANALOG JACK on the 2496.
is that the gist of it or am i missing something? thanks