No Input sound on 192

[klovn]

Hello guys,
I've been trying to fix this issue for a long time and I couldn't get it to work yet. I bought a new setup recently but couldn't get it to work as I wanted.
I simply don't get any input signal on my Audiophile 192 in any way, and I really need to record.

I have a Behringer Xenyx 1202 Mixer, it gets signal from the Microphone (which I have tested in other cards and is working fine), but the Audiophile doesn't. I've tried to connect cables into different orders, but no sucess. I'm using the analog ports, by the way.

I've read many of the other threads here, but none of them helped.

I tried updating the driver once, but then after the installation I hadn't even output sound at all. Still, I don't think it is the reason causing the input problem.

I uploaded images of my Delta Mixer configurations so you guys can see better how it looks like at the moment.

My config:

- Windows XP SP3
- Asus P5KPL motherboard
- Intel Core 2 Quad 9550 processor
- 4GB RAM (2x2GB) @ 800mhz
- Samsung 1TB HD @ 7200 RPM

In case you guys need any additional information, I'll gladly answer.

Please, I really need your help!

Thanks in advance.

[kirot]

klovn,
am just wondering re your delta control panel. Mine doesn't have patchbay which I understand a unique feature of 192. I know everything is fine. Just try make sure to connect the proper output of your behringer to the input of your delta. Bty, try both the regular audio out and monitor out of your delta 192. I think the trick is there.

[klovn]

Thanks for the tip, mate. I'll try it right now! In case it works - or not - I'll post here.

Again, thanks for helping.

[klovn]

Hello again,
I've tried what you said, but I'm almost sure I'm doing something wrong.

Here are some high resolution images of how my connections look like, it may help find the mistake:

http://www.zshare.net/download/55054199eced4587/

As you see, I've got the channel 1's Line in on the mixer connected to the Delta's In/R.

Here's also the link for the Mixer's manual in case it is needed:

http://www.zshare.net/download/55054682e06d6900/

Any help would be appreaciated!

[JA]

As you see, I've got the channel 1's Line in on the mixer connected to the Delta's In/R.

That's your problem. You have an input connected to an input. You need to connect the Mixer's output to the Delta's input.

[kirot]

Yup, JA is right as I emphasized on connecting the output of your behringer to 192's input. We have similar set-up, both the PC and the mixer, but your's a little higher.

I have seen the pictures you uploaded. I suggest you use the main output of your mixer to the input of the 192. A question: what is that TRS connector doing below your XLR connector (input 1)? As I know, you cannot use both connectors together. I suggest you transfer the other to line 2.

Am still bothered with your Delta control panel. I suspect that you were previously using other Delta cards or perhaps you loaded the other delta driver. The control panel of my 192 is very simple (pls see attached). Have been recording couple of songs with a guitar and karaoke with it...

[kirot]

regarding the TRS connector on line input 1, pls transfer to main out R (sorry I just realized it when I viewed photo #8). That will be connected to the 192's input R. Do a similar connection from main out L to the 192's input L.