No Sound from Delta 1010

[ralphr]

I have installed a Delta 1010 into a PC, Pentium D 3.00GHz, 2 GB RAM, XP Home SP2, but despite levels showing in the Monitor mixer when playing Sonar 8 ( and Cool Edit Pro ) I get no sound. Audio cables are correctly connected to my mixer ( & tested OK with another PC ), onboard audio is disabled, IRQ is separate.
I know that this system used to work with an EMU 0404 card
Any ideas pls

[JA]

What do you have selected as the Output Source on the Patchbay/Router page of the Delta Control Panel? If you set it to monitor mixer you can monitor your inputs and outputs. Make sure the levels are turned up on the Mixer page, and make sure that nothing is solo'd or muted.

[ralphr]

I have Monitor mixer selected & Master Volume plus wav out 1/2 are set at 0db, nothing is muted or soloed. I do have another PC with a Delta 410 that works fine so I have gone for the same settings.

[JA]

Can you try setting your system default output to a different output pair (e.g. outputs 3/4) and testing a different output? Have you tested the card in a different PCI slot?

Your settings sound correct, so if it's not working, it may be a hardware issue. Can you test the 1010 in the other computer that has the 410 working?