s/pdif mono output

[g80]

Im channeling my tv's audio signal through my Audiophile 192 s/pdif input, but Im only getting sound through my right monitor/speaker.
The monitor mixer shows input in two channels. How can I send output through both speakers?

[JA]

Are your speakers connected to a single output on the 192? Each output on the 192 is mono; you need to connect to both a left and right output.

[g80]

JA, my speakers are connected via the TRS L and R outputs. TRS to XLR cable to BX5a speakers.
Music works fine- L and R channels working independently.

Here is a link with screen shots of my configuration screen(s).
http://img12.imageshack.us/gal.php?g=97660601.jpg

Thanks

[JA]

If you change the Sync Source to S/PDIF in, does that have any effect?

Double check the connections on the 192. It sounds like you may be connected to the Left Main Output, and the Right Mon output. This would explain why playback works through both speakers and direct monitoring through 1. Make sure the left speaker is connected to the Mon Out L connector.

[g80]

JA, thanks, you were right about the connections.

Is it possible to output this signal through the main out?

[JA]

What OS and driver are you running? The new control panel for XP SP3 and Vista allows you to set the output source for outputs 1/2 to be inputs 1/2 and may allow you to do this. Otherwise, you would need software to pick up this signal and send it back (e.g. software monitoring).