musicman
08-04-2008, 01:35 PM
I have just opened my brand new Delta 66, installed it successfully on my PC (WinXP), hooked up my Soundcraft mixer and....
OUT 1 on the breakout box is dead!
I have conducted several fault elimination steps (swap cables, multiple plug/unplug cycles, etc. etc.) and have concluded that Out 1 is broken. Outs 2, 3 & 4 work fine, as do all the Ins. I've also tried various software applications - all with the same result. The M Audio Delta Control Panel shows channel 1 as working, but the hardware Out is dead.
I'm going to phone my dealer tomorrow, but thought I would just ask here whether I am missing something, or whether someone else has perhaps had this problem?
Thanks
OUT 1 on the breakout box is dead!
I have conducted several fault elimination steps (swap cables, multiple plug/unplug cycles, etc. etc.) and have concluded that Out 1 is broken. Outs 2, 3 & 4 work fine, as do all the Ins. I've also tried various software applications - all with the same result. The M Audio Delta Control Panel shows channel 1 as working, but the hardware Out is dead.
I'm going to phone my dealer tomorrow, but thought I would just ask here whether I am missing something, or whether someone else has perhaps had this problem?
Thanks