![]() |
|
|||||||
| Delta Series Delta 44, 66 (OmniStudio), 410, 1010, 1010lt, Audiophile 24/96 & 192 |
![]() |
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
I already have a Delta 66 but i need aditional imputs to record drums with Nuendo.
Is it acquiring another Delta 66 the best solution? Thanks
__________________
Delta 66 AMD 4200+ 2 Gb Ram OS XP sp2 |
|
#2
|
|||
|
|||
|
How many additional inputs do you need? You can sync the 2 cards via S/PDIF, which would give you 4 more inputs. The Delta 1010 would give you 8 more inputs.
__________________
- JA M-Audio Technical Support Tech Support will not respond to private requests for technical assistance Help us help you - Please post system specs and detailed information M-Audio MIDI device Setup Files (Enigma) Troubleshooting Guides: PCI -- IRQ M-Audio Knowledge Base - FAQs, guides, and tutorials |
|
#3
|
|||
|
|||
|
In total i need 7 or 8 imputs to record drums properly.
Sorry if it's a dummy question but in order to connect via S/PDIF to a second Delta 66 a need a cable right? How is that cable? Is it a normal digital optical lead cable? Thanks for the help
__________________
Delta 66 AMD 4200+ 2 Gb Ram OS XP sp2 |
|
#4
|
|||
|
|||
|
You need a 75ohm coaxial (RCA) digital cable. Like this one. In the Delta Control Panel, you leave the first card's clock source as the Internal Xtal, and for the second you would select the S/PDIF input; check out this FAQ.
__________________
- JA M-Audio Technical Support Tech Support will not respond to private requests for technical assistance Help us help you - Please post system specs and detailed information M-Audio MIDI device Setup Files (Enigma) Troubleshooting Guides: PCI -- IRQ M-Audio Knowledge Base - FAQs, guides, and tutorials |
|
#5
|
|||
|
|||
|
Hi again!
I bought a Delta 1010LT to add to my Delta 66. With a 75ohm rca i already have both cards in sync. 1 - The problem is that if i want to record 6 tracks simultaneously using 4 inputs of D66 and 2 inputs of D1010LT i only have signal in the first 2 of the Delta66. I'm using Nuendo3 and when i creat the tracks i can only choose one of the below options: ASIO MULTIMEDIA DRIVER STEREO IN > Left ASIO MULTIMEDIA DRIVER STEREO IN > Right 2 - DELTA 1010LT > In Delta Control Panel i have good signal but can't receive any signal in Nuendo. The only signal Nuendo can record are inputs 1 and 2 of Delta66. What i'd like is to create 6 tracks and assign them to Delta's 66 and 1010lt inputs, something like: Track 1 > Left PCM 1/2 Delta 66 Track 2 > Right PCM 1/2 Delta 66 Track 3 > Left PCM 3/4 Delta 66 Track 4 > Right PCM 3/4 Delta 66 Track 5 > Left PCM 1/2 Delta 1010LT Track 6 > Right PCM 1/2 Delta 1010LT Help!!! Cheers Mario Raposo
__________________
Delta 66 AMD 4200+ 2 Gb Ram OS XP sp2 |
|
#6
|
|||
|
|||
|
Do not use the ASIO Multimedia Driver. You need to use the M-Audio Delta ASIO. You may need to add the input/output busses in the VST Connections page; check out this FAQ.
__________________
- JA M-Audio Technical Support Tech Support will not respond to private requests for technical assistance Help us help you - Please post system specs and detailed information M-Audio MIDI device Setup Files (Enigma) Troubleshooting Guides: PCI -- IRQ M-Audio Knowledge Base - FAQs, guides, and tutorials |
|
#7
|
|||
|
|||
|
100% WORKING!!!
Thanks for the good help! Cheers Mario Raposo
__________________
Delta 66 AMD 4200+ 2 Gb Ram OS XP sp2 |
|
#8
|
|||
|
|||
|
So would a system running a pair of delta66/omnistudios sync'd together provide 4 mic preamps, 4 line-ins and 4 headphone outputs?
|
|
#9
|
||||
|
||||
|
Yes. That's right.
|
|
#10
|
|||
|
|||
|
cool, it seems too good to be true! so effectively you could have 8 simultaneous mic inputs? (with 4 preamped externally of course)
Last edited by Binman; 02-12-2009 at 04:45 PM. |
![]() |
| Thread Tools | |
|
|