Double Output 1/2, 3/4 HOW TO ?

[tomahack]

Hello ev1, im using my delta 66 to plug in my guitar in INPUT 1, and i MONO-MIX it to output 1/2 in a Y to speakers OR headphones.

I have a friend who play guitar too. I know i can put his jack into INPUT 2 and do a mix with sliders to reproduce ME on LEFT(1) and HIM on RIGHT(2)... You follow me right now ?

Ok, here's my problem. At home, i can't gain volume too high, so i need two headphones...one for me, one for my friend..The problem is I CANT HEAR the same thing in both headphones!!!
(EDIT: In fact, i can't hear nothing) If sound is set to output on 1/2, nothing will out in 3/4 and vice-versa

How can i hear the same thing in both headphones ? I tried many things, like to select Delta Mon.Mixer from windows panel..nothing to do..

The only way i can hear it in the FOUR channels, is after recording, because i can send each track where i want..

But it seems the windows driver of the delta cannot support sending the sound LIVE in 1/2 and 3/4 at the same time...

IF YES, tell me ASAP please And if no, how m-audio didnt thought about this feature ?

Maybe a single RETURN, whould do the job, like 1/2 rtrn to 3/4 ...

Thank you very much.

[JA]

To hear the same thing out of outputs 1/2 & 3/4, you need to assign your software output to be 3&4 instead of 1&2; this will send the signal back out of outputs 3/4. With outputs 1/2 set to monitor mixer, turn up the level for Wave Out 3/4 to send this signal through the monitor mixer and out of outputs 1&2 as well. You will have to use software monitoring to hear the inputs through both outputs though.